Technical Resource / Profile Selection
SEG Frame Profile Guide
A buyer-focused guide to comparing profile depth, configuration, H-code directions, wayfinding profiles, finish inputs and drawing requirements.
Use the matrix as a starting point
Depth alone does not select a frame. Confirm the fabric interface, sidedness, mounting, supplied condition, lighting space, finish and the exact section drawing before acceptance.
Current depth matrix; exact section confirmed by drawing
Drawing required before specification
Physical samples available; section drawing required
Project/sample mapping required
Profile depth
Use overall depth to narrow the discussion, then confirm the exact section and usable internal space on the drawing.
Configuration
State single or double sided, wall, suspended, freestanding or another placement, plus the expected supplied condition.
H-code direction
H-code is used here as a family label for embedded fabric-retention variants. Flush, stepped, reinforced and insert directions require section review.
Finish
Black and white appear in specific source variants. Additional project-specific colours are confirmed from a colour card, physical reference or approved sample.
Custom tooling
A new section may be considered after drawing, volume, tooling, MOQ and timing review. Tooling is not accepted automatically.
What to send
Section drawing if available, target depth, dimensions, quantity, sidedness, mounting, fabric interface, finish and destination.
Profile review
Bring the application, not only a depth number.
A complete brief helps identify which profile direction and drawing checks are still needed before quotation.